Date:         Tue, 31 Aug 1999 18:27:04 -0700
Reply-To:     Stuart <stuart@COBALTGROUP.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart <stuart@COBALTGROUP.COM>
Subject:      Re: Ignition Switch
Comments: To: Chrissy Hill <rhill@MYLINK.NET>
Content-Type: text/plain; charset=us-ascii

Sorry, you need to pull the wheel AND use a puller to remove the lock
housing.  After that it is easy and the part is cheap from the dealer.

Both the Bentley and the Haynes explain this procedure, and it would be
worth your getting the Haynes to take to an independent mechanic and
have him do it.  It took me about a half an hour to do with the right
tools I just did it two weeks ago).

It shouldn't cost more than $60 to $80 plus the part, which is about
$15.

Stuart

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.