Date:         Mon, 30 Aug 1999 21:02:38 EDT
Reply-To:     Darylchris@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Daryl Christensen <Darylchris@AOL.COM>
Subject:      Re: Noisy ring & pinion
Content-Type: text/plain; charset="us-ascii"

Harry-- Quite a bit of the time I see a piece of "stuff" that gets pulled
thru the gear sets or ring/pinion and suddenly there is a bunch of damage
done till the pieces are ground up.  The magnetic plug should have had a ball
of drek(scandahoovian for crap) on it if thats the case. The DU code trans
has the better ring/pin set, so thats the one to rebuild. The ACW  or ABD has
the 6 tooth crummy one installed. Ck web page at  aatransaxle.com  for  $$
details.
Good luck, Daryl of AA Transaxle

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.