Date:         Sun, 5 Sep 1999 12:48:53 +1000
Reply-To:     Dom <dmoon@METZ.UNE.EDU.AU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dom <dmoon@METZ.UNE.EDU.AU>
Subject:      Re: An Introduction and noise question
Content-Type: text/plain; charset="iso-8859-1"

Have you checked the cooling system fan
I had a similar problem once with a friends 1600 beetle. Turned out that the
fan had unscrewed itself
Different engine I realise but maybe the same problem.


Dominic

----- Original Message -----
From: Dennis Coggia <d_coggia@HOTMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, September 06, 1999 12:30 AM
Subject: An Introduction and noise question


Almost immediately I noticed a grinding type of noise once it warmed up. To
me it
sounded like the flywheel rubbing. I do have a cylinder running at 65 psi,
all others are about 90 to 110 which is actually another question but I
don't think it is
related to the noise. I've got a tempature gauge and at first startup the
engine runs beautifully
at about 210. After about 20 minutes the noise starts and the temp slowly
rises to a n overheat. The noise seems to only appear at idle or very low
engine loads.
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com