Thanks for your reply, I have sent mine to him too. I havent yet understood how a short to ground can cause the failure as the ECU switches the injectors to ground anyway and a short would just by-pass the ECU. However I am not an electronics engineer and I plead ignorance but I would love to learn. Incidently, I suspect a fault in my aux.air regulator which shows 29 ohms when cold but I think it may short out when it gets hot. My reasoning is that a short in it would cut off the power going to the injectors by shorting out the supply wire to them as it is in parallel with the ECU. Purely an opinion at this point though but you may want to check yours. Its located under the intake bellows and very hard to reach. It gets its power from wire 34 which is joined to wire 30 from the fuel pump relay, in mid loom. Let me know what develops with yours Steve |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.