Folks with boats that sit in the ocean docked all the time use Zinc that is bolted to the hull of the boat because of electrolysis... I think a piece of zinc in one of the hoses with a wire attached to the motor when the hose leads into might be a way to do this.. Maybe if you had access to a heliarc welder you could use aluminum wire and tack it just inside the water outlet or inlet whichever works best for access of the wire and which hose would support the zinc's presence without creating a blockage that would cause overheating.. just my 2 cents... Alan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.