I have installed aux. high beams today, and I am pretty much done. As I was installing the instrument cluster, and doing a systems check, I saw that the turn signal indicator LED was just glowing. I tried the lever, no turn signals, only thing is that the LED was bright now. No light in the turn signals. Turn signal lever off again, the LED returns to its glowing state. I tried the hazard lights, they work perfectly, the LED is dark between flashes, and goes back to glowing when I turn the hazards off. What gives?? What I did: I had the instrument cluster out, the fuse box was hanging by the wires, I had both head light assemblies out. The engine had been running for 15 minutes when I plugged in the instrument cluster. The radio was on during the entire installation, probably 4 hours. The engine started like a charm, no signs of low battery. Any clues? Im off to study the wiring diagram. PerL 87 Syncro 112i |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.