Date:         Tue, 14 Sep 1999 21:04:13 +0200
Reply-To:     Per Lindgren <lindgre@ONLINE.NO>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Per Lindgren <lindgre@ONLINE.NO>
Subject:      The turn signals are gone!!
Content-Type: text/plain; charset=us-ascii

I have installed aux. high beams today, and I am pretty much done. As I
was installing the instrument cluster, and doing a systems check, I saw
that the turn signal indicator LED was just glowing. I tried the lever,
no turn signals, only thing is that the LED was bright now. No light in
the turn signals. Turn signal lever off again, the LED returns to its
glowing state. I tried the hazard lights, they work perfectly, the LED
is dark between flashes, and goes back to glowing when I turn the
hazards off. What gives??

What I did: I had the instrument cluster out, the fuse box was hanging
by the wires, I had both head light assemblies out. The engine had been
running for 15 minutes when I plugged in the instrument cluster. The
radio was on during the entire installation, probably 4 hours. The
engine started like a charm, no signs of low battery. Any clues?

Im off to study the wiring diagram.

PerL
87 Syncro 112i