The Bentley manual says to mark the flanges before removing the driveshaft on a syncro. This makes sense if you're reinstalling the same driveshaft but what if you're installng a new or different one? Do you need to insure that the flanges on the tranny and diff are in the same relative position? Mark McCulley 87 syncro Westfalia TRNSPTR ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.