Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 1999, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 18 Sep 1999 21:32:22 -0400
Reply-To:     "Joe L." <jliasse@TOAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Joe L." <jliasse@TOAST.NET>
Subject:      Re: Tranny Gear Oil Change
Comments: To: Michael Snow <mwsnow@HOME.COM>
In-Reply-To:  <NCBBJDNKFJENOJPAKOLFOEJCCGAA.mwsnow@home.com>
Content-Type: text/plain; charset="iso-8859-1"

Im the guy who ask about the flushing. I got several answers, all of which were along the lines of "Flushing wont do any harm but you dont really need to." Mainstream opinion seems to be: Drive it around for a while to warm things up, then drain. With a level van this will leave about a half quart of the "old stuff" still in there but since Readline is compatable with the old stuff it will do no harm. As far as things to flush with the only two guys mentioned anything specific. One said to flush it with more Redline before sealing the drain hole and topping off. He also added that this would cost more than any benefit was worth so forget flushing. The other guy said any benefit of getting all the old stuff out of there with a commercial "flusher" may be offset by the gears running without any lube at all during the time it took for the Redline to work its way into the flushed out nooks and cranies that, being flushed, are bone dry until the Redline gets there. He added that he had no idea how long this would take or even if this was a factor but since the idea occured to him he passed it along.

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Michael Snow Sent: Friday, September 17, 1999 9:39 PM To: vanagon@GERRY.VANAGON.COM Subject: Tranny Gear Oil Change

I picked up 4 quarts of Redline MT90 today with the intention of changing gear oil tomorrow. I believe that someone asked recently whether it was advisable or beneficial to attempt to flush the old oil from the transmission using some type of solvent. If there was an answer to this question, I missed it. Any thoughts or experience with this?

Mike Snow 1982 Westy diesel


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.