Before I rip this thing off and so something stupid...can the cat be removed and the muffler be directly to the header flange? It looks like these are the same size on both ends. My concern is that the offset on the muffler inlet my not get by the exhaust pipes. The muffler I have is a bosal from the BD. The reason I'm asking is, I don't have an 11mm box end to remove the cat-muffler bolts and a socket wont fit in there. I would just like to know if anyone has tried this, it also looks like the hanger strap will still work only farther out on the muffler. ( I haven't any inspections to be concerned with) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.