Got the holes drilled in the fiberglass bumper of the 90GL, wires routed, relay plugged up and juice to the bulbs. These lights are a heck of a buy at $95/pr. E-codes for $275 and no boots to seal them? Mounted the switch above the brake warning light on the dash(stereo amp rocker switch got the dummy location on the right) and the relay in front of the heater hoses inside the firewall. Kit comes with a bubble type light aimer Only sweat is how far in or out you want them to shine.
Happy visible Moose and Flying Squirrel
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.