Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 1999, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 1 Oct 1999 07:47:31 -0400
Reply-To:     Bulley <gmbulley@BULLEY-HEWLETT.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bulley <gmbulley@BULLEY-HEWLETT.COM>
Subject:      Re: PVC grey water tanks...
Comments: To: "W. Silva" <wsilva@CAPECOD.NET>

A deep thanks to David Bogle, who forwarded me to www.raritaneng.com . These folks deal in all sorts of marine stuff; plumbing mostly. They feature hundreds of 3/8" thick poly tanks made for clear water or gray water. Further, they are knowledgeable about how to fit this stuff.

The ballpark cost of the tank, if they have one with the correct dimensions, with custom-placed fittings looks like around $230. If we wanted a custom mold specifically for our Vanagons, they would do it for the same price, but would require an up-front order of 25 tanks to off-set the cost of the mold.

I'll keep you posted.

G. Matthew Bulley Director Bulley-Hewlett & Associates www.bulley-hewlett.com Cary, NC USA 888.468.4880 tollfree

-----Original Message----- From: W. Silva [SMTP:wsilva@CAPECOD.NET] Sent: Friday, October 01, 1999 7:02 AM To: vanagon@GERRY.VANAGON.COM Subject: PVC grey water tanks...

We were pondering this subject last year. In many RV Catalogues you can buy tanks, may sizes, may configurations. Installing it would be pretty easy. The only thing I can't figure out is how to keep the water from setteling in the low point - that is from where you come off the gray water tank, go lower and travel across the van back up to the sink drain fitting on the other side. Water seeks its own level so you would always have water in the line between the sink and the gray water tank-you wold also need a "trap" of some sort ( with a clean-out) or you would constantly have that "grey water smell" inside you van.You can purchase a slide type valve made by Valterra at any RV store (or through me) for opening and closing the "emptying port" so that souldn't be a problem either. This is a challange to all you engineers out there......go to it!

Wendy & John Cape Cod, MA

'85 Westy, "S-CAPE" '98 Passat

CAMPERS ON CAPE COD - SEPT 1999


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.