Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 1999, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 5 Oct 1999 09:11:51 -0600
Reply-To:     BILL <billv2@PRODIGY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BILL <billv2@PRODIGY.NET>
Subject:      Re: Wiper Shaft Replacement?
Comments: To: Louis Rumanes <lrumanes@WEBTONETECH.COM>
In-Reply-To:  <37FA0CA9.4B593DD4@webtonetech.com>
Content-Type: text/plain; charset="iso-8859-1"

I have removed and replaced mine by only removing the instrument cover. Remove the black plastic on the stem by sliding it up and off. Loosen up and remove the nut and washer. Go inside and with a pair of plyers, pop the stem out of the wiper transmission. This is NOT easy and you need to have small/med hands. Be careful not to bend the transmission assembly. Lube the ball socket (I use SO2 grease) and pop the replacement back in. Again, this is NOT easy. You will have to use the plyiers to pop it back in the socket. Bentley shows removing the entire wiper transmission by undoing all the nuts and bolts holding the transmission in. To access this, you remove the glove box (or drop open) and slide the transmission out the passenger side. Do not remove the dash. I tried this method, but could not remove and slide the %^$# out!

Bill V. "I'd Rather Be Hiking The '82 CA Westy [FreeBird] Greater Yellowstone" "Famous Potatoes"

> -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf > Of Louis Rumanes > Sent: Tuesday, October 05, 1999 8:35 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Wiper Shaft Replacement? > > > Hi, > > I have a broken driver's side wiper shaft on my 89 westy. I can get at > it by taking out the instrument panel, but haven't been able to pop the > shaft off the linkage. Is there a way to do this without removing the > dash? If not, does anyone have any tips on dash removal, and drilling > out the shear bolts? > > Thanks, > > Louis Rumanes >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.