Date:         Wed, 6 Oct 1999 12:31:41 -0400
Reply-To:     EMZ <vw4x4@FYI.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         EMZ <vw4x4@FYI.NET>
Subject:      Re: BA6 Info - question?
Comments: To: Dan Soiney <soineydg@MAIL.MILWAUKEE.K12.WI.US>
In-Reply-To:  <000201bf1011$6f369600$5546e3a9@welchma.milwaukee.k12.wi.us>
Content-Type: TEXT/PLAIN; charset=US-ASCII

   That is a very good question? Where does the Gas heater vent into
the vehicle, and where does it get its fresh air from? Now I understand
that the air cooled vehicle, it was inline with the existing heater
tube, but what about the water cooled deisels?

            Eric                   86-VW4x4
            vw4x4@fyi.net          72-240z
            Pittsburgh, PA USA     1936-Chrysler


On Wed, 6 Oct 1999, Dan Soiney wrote:

> Has anyone tried to retrofit a BA6 from a vanagon into a 78?  All my heat
> ducting is rotten.  Can I install this heater and just take the inlet air
> from the cabin, and vent it into the cabin through what is left of the front
> ducts?  Or does this thing 'need' to be run from the heater boxes?
>
> Danno
>
> Director of Electrons
> Der Busbesitzer Gruppe
> Http://www.dreamwater.com/dbg
>
> > -----Original Message-----
> > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
> > Of Groff, Montgomery
> > Sent: Wednesday, October 06, 1999 10:05 AM
> > To: vanagon@GERRY.VANAGON.COM
> > Subject: Re: BA6 Info - Findings - Maintenance group
> >
> >
> > I used flexible stainless-steel on a Stewart Warner gas heater in my '74
> > Westy. It can be found at FLAPS and FLMS (M=MUFFLER :))
> >
> > Monty
> > '89 Westy
> > '62 Sunroof Bug
> > Denver, CO
> >
> > > Speaking of heaters, Anybody know where to get the short exhaust piece
> > > that extends from the outlet of the BA-6?
> > > Ken Wyatt
> > > 82 westy
> >
>