Date:         Thu, 7 Oct 1999 01:43:17 EDT
Reply-To:     Darylchris@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Daryl Christensen <Darylchris@AOL.COM>
Subject:      Re: Small tranny leak in front end
Content-Type: text/plain; charset="us-ascii"

Peter- you CAN remove & reseal that end housing witout removing the
transmission on the Syncro.
Just remove driveline, skid plate & fnt mount bolts and lower the trans
enough to get at the 6 bolts. It pops right off - reseal with RTV (silicone)
and simply reverse procedure (theoretically). One of my customers just did
it--took less than an hour for the pro to do it.Good Luck
Daryl of AA Transaxle

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.