As per the Digifant wiring diagram that I emailed the list, the Digifant computer ground pin number 85 on the fuel pump relay. Pin 86 goes directly to "15" which is "12V with key on" a simple way to tell if this is working or not is disconnect the terminal 86 wire on the relay and run a test lead from 86 on the relay to 15 on the ignition coil. This assumes that your coil is getting 12V when the key is on... At 01:31 PM 14/10/1999 -0700, Grant Holst wrote: >Does anyone know what energizes the coil in the >fuel pump relay? I think one side comes from the positive >side of the igntion coil and the other end goes to the ecu. > >Grant > > -- David Marshall - - Quesnel, BC, Canada -- -- 78 VW Rabbit, 80 VW Caddy, 84 VW Westie, 85 VW Cabriolet -- -- 87 Audi 5000 Quattro, 88 2.0L VW Syncro Double Cab -- -- David's Volkswagen Home Page http://www.volkswagen.org -- -- Fast Forward Autobahn Sport Tuning http://www.fastforward.ca -- -- david@volkswagen.org (pmail) or vanagon@volkswagen.org (list) -- |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.