David Marshall wrote: > > I do simular conversions with CIS, Digifant and Motronic. Here are my > experiences > > 1 - I find this a problem with the Digifant systems. The computer wants to > run the engine at 800rpm which is too low, especially if it is cold or the > timing is slightly off. > > 2 - The is common with all 50 degree mounting angle conversions, there are > some manifolds out there that are better than others for clearance. FWIW, the SA conversion (with the shorter block, not the ABA block) has a unique manifold on it that does not seem to hit. You can kind of see how it is slightly different than the manifolds on the www.tiico.com site... dave |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.