Date:         Sat, 30 Oct 1999 19:40:52 EDT
Reply-To:     KENWILFY@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         KENWILFY@AOL.COM
Subject:      Re: How do you replace the hose from the coolant overflow ...
Comments: To: printstud@t-three.com
Content-Type: text/plain; charset="us-ascii"

Get some wire cutters and cut the metal crimp ring and bend it open.  Then
the hose will slide off.  The key is not to put a "side load" on the plastic
nipple when cutting the ring off.  Any side to side twisting might break the
nipple off.

Have fun,
Ken Wilford
http://www.vanagain.com
John 3:16
Office (856)-765-1583
Shop (856)-327-0027
Fax   (856)-327-2242

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.