Date:         Tue, 2 Nov 1999 14:21:55 -0800
Reply-To:     mark drillock <drillock@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mark drillock <drillock@EARTHLINK.NET>
Subject:      Re: Push rod tube instalation and Bentley
Comments: To: Nathaniel Merrill <sugarmaple@DELLNET.COM>
Content-Type: text/plain; charset=us-ascii

Can't you see that the pushrod tube with the arrow in the drawing on 15.25 is
different than the other 3? It does NOT have the accordian sections on the
ends. The VW dealers sell this as a replacement part for when the head is not
removed. Otherwise you buy the original one piece type

Mark

Nathaniel Merrill wrote:

> What does the list make of Bentley's stasting that Stock VW push rod tubes
> may be installed with the heads in place?  See pg. 13.36 and 15.25.  This
> seems unlikely to me knowing what the tubes are like.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.