Date:         Mon, 1 Nov 1999 15:04:18 -0800
Reply-To:     Mike Karseboom <mikekars@INREACH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Karseboom <mikekars@INREACH.COM>
Subject:      WTB:  Synchro Locking Differential Switch
Content-Type: text/plain; charset="iso-8859-1"

To get more snow traction on my 90 GL (non-synchro) I am going to try to
install a locking rear differential.  The guys at German Transaxle in Bend,
Oregon say they can do this with a synchro case and lock mechanism.  The
other internals will be the same as the non-synchro so the van remains a 4
speed.

This should be an interesting project, but  I need the dash mounted switch,
vacuum tubing, and the transaxle mounted vacuum canister from the a synchro
to do it.  Any sellers?

Mike Karseboom
Mt. Shasta, CA

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.