Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 1999, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 8 Nov 1999 23:18:02 -0600
Reply-To:     John Rodgers <inua@SCOTT.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@SCOTT.NET>
Subject:      Re: Need Sender Advice (Step 1)
Comments: To: KENWILFY@AOL.COM
Content-Type: text/plain; charset=us-ascii

Ken,

Along with the various devices etc, suggested by G. Bulley and others, you should borrow from the aviation industry and include in the package a can of a good brand of Cone Spray.

It works best when applied immediately following driver recovery from White Knuckle Fever after some miscreant has driven the Pucker-Factor right off the scale by cutting in front and then putting on the brakes to keep from ramming the guy in front of him.

A high quality cone spray will ensure the elimination of all ensuing cones, and that the upholstery material will flatten back out nicely in the seat and will remain in good pliable condition with no lasting wrinkles.

OK, I know it's not Friday....and I'm just funning!!

John Rodgers

KENWILFY@AOL.COM wrote:

> This is the first step in my quest for a computer diagnostic setup for my > van. Before I invest in expensive computer equipment, etc. I need to get the > senders that I will need to send the information to my analog gauges first > and then the computer system later. So what I need to know is: > 1. Do I need VDO senders or is some other brand as good/cheaper or > better/same price or more expensive? > 2. Does anyone know of a electrical manifold pressure gauge and sender setup > (All I can find is mechanical). > 3. Has anyone ever used the "Fuel to Air Ratio" gauges that use your oxygen > sender as the sender for the gauge? How do you like it? > Finally what list of gauges would you recommend? Here is what I want so far: > Oil pressure > Oil Temperature > Manifold pressure > Head Temperature > Voltage > Amperage > Water Temperature > Coolant system pressure (Still debating this one) > Air-to-fuel ratio > > Thanks in advance for your help. > > Ken Wilford > http://www.vanagain.com > John 3:16 > Office (856)-765-1583 > Shop (856)-327-0027 > Fax (856)-327-2242


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.