> I'm not sure you could heat the cat enough to melt it. > If you could, I think gravity would settle it to the bottom oh, most definitely you CAN cause the cat to "melt down" ... now, it does NOT look "melted", but it breaks up and falls apart and will definitely clog the exhaust. my brother just finished replacing his cat on the Jetta. the stuff inside looks like a honey-comb (but with square holes, instead of hexangonl holes), and the holes are VERY tiny ... like only 2mm on a side. and there are LOTS of holes. anyway, the stuff is pretty long, and what seems to happen is that the stuff breaks in two (or four or eight or more) pieces and some of the pieces bounce around til they are sideways, blocking the flow. so it's not really "melted" like you'd think ... not like into a puddle or something ... but it's useless after this happens, and all you can do is take it off and either punch out the contents (leaving a straight pipe with nothing inside) or replace the thing. IF you deal with this stuff, i'm advised to NOT touch the stuff with your bare skin ...not sure exactly why, but it is supposedly rather toxic, as in poisonous. not sure i believe it, but better safe than sorry. joel |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.