Date:         Mon, 15 Nov 1999 09:08:37 -0500
Reply-To:     Bulley <gmbulley@BULLEY-HEWLETT.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bulley <gmbulley@BULLEY-HEWLETT.COM>
Subject:      Re: Heater booster sources?
Comments: To: "Pfunky@AOL.COM" <Pfunky@AOL.COM>

JC Whitney was where I got mine. I would highly recommend the squirrel-cage
type (cost $89) over the bilge blower type ($69). The S-c type is nearly
silent, and blows a heap more air than the bilge blower type. Further, I
wouldn't use paper tubing. Re-use the stock tubing, which has a little
insulation, but surround it with Hart & Cooley R-6 or R-4.3 insulated Mylar
ducting. The 4" ID version fits great, and will make a dramatic difference
in the temperature of your heat. Costs about $14 for a 25-foot box.

Instructions follow: (posted once before, but here it is again for your
conveyance. :)

G. Matthew Bulley
Director
Bulley-Hewlett & Associates
www.bulley-hewlett.com
Cary, NC USA
888.468.4880 tollfree


-----Original Message-----
From:   Patrick Foltz [SMTP:Pfunky@AOL.COM]
Sent:   Monday, November 15, 1999 8:40 AM
To:     vanagon@GERRY.VANAGON.COM
Subject:        Heater booster sources?

I've borrowed the ramps and have started re-vamping the heater system of my
'80 westy and I need to find a source for the blowers (inline) to assist
the
fan and the paper tubing in betwixt.  TIA,
Patrick