Why wont this work?? Perhaps the CV's on a Syncro are different from one side to the next rendering them non-interchangeable for SAME side - I don't know, I own a 2WD. I looked at my races and they specifically wear on one side, so, why shouldn't they wear properly on the other side regardless if you swap ends on same side OR swap axles? Ken Madsen Whitby, in "getting colder" Ontario
> madsen wrote: > > if the job is a result of a occasional clunking noise from the > > CV's, you can turn the axle around so the races wear on the other side. (my > > case). > > Any other views on this??? > > > Larry Hamm wrote: > Ken, > You can swap the axles from side to side, but swapping ends on one axle > will not help. The wear pattern remains the same. This was pointed out > to me when I suggested flipping one axle. > Larry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.