While I am thinking of it. I had to change a crank/WP pulley on my 82 diesel. It was a roadside repair without a spare. Someone stopped and helped me. The only belt we could find on a Friday night was 1/2" to large. It was still hard to ride it up on the pulley. I notice no adjustments. The new belt is due in today. Is there an adjustable pulley that is not readily seen. The Bentley mentions "shims". I don't see how this works. Back to the reason I mentioned this. I needed a small pry bar to make the belt ride up on the pulley. Bill ----- Original Message ----- From: Bulley <gmbulley@BULLEY-HEWLETT.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, November 23, 1999 5:56 AM Subject: Re: Toolkit
Here's the Bulley Toolkit: A "multi-screwdriver" (five interchangeable bits in the handle) Vice-Grips(r) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.