Date:         Tue, 23 Nov 1999 23:36:12 -0600
Reply-To:     Jay & Kim Schmidt <schmidt5@HSONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jay & Kim Schmidt <schmidt5@HSONLINE.NET>
Subject:      rear pulley seal question
Comments: To: vanagon@vanagon.com
Content-Type: text/plain; charset="iso-8859-1"

I mentioned rear main seal in an earlier post. I meant pulley end seal. I am
a student of Muir and rear is rear, but have found out some call the
front(torque converter end) seal the "rear main." Sorry for the confusion. I
need to replace the rear pulley end seal on an automatic.
Should I just wedge something in the hole on the torque converter drive
plate so I can untorque the rear pulley bolt?
Thanks,
Jay

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.