Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 1999, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 6 Dec 1999 14:02:35 -0800
Reply-To:     Stuart MacMillan <stuart@COBALTGROUP.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuart@COBALTGROUP.COM>
Organization: The Cobalt Group
Subject:      Re: paint job
Comments: To: Bob Berkemer <berky@WIN.BRIGHT.NET>
Content-Type: text/plain; charset=us-ascii

I painted my top myself this summer. Just used a Scotch medium scuffing pad with water followed by a solvent surface cleaner to get the surfaced prepped. I took the luggage rack off, removed the seals (needed new ones anyway), masked off the skylight opening, (remove the skylight but not the seal for it) and draped painter's plastic all around the van and shot three coats of PPG Delthane catalyzed polyurethane enamel.

I was going to flatten it down, but it looks great with the gloss. They actually were fairly glossy when new, but didn't stay that way for long. The paint and materials ran about $170 (1 qt paint, reducer, catalyst, scuffing pad, lacquer thinner for clean up, plastic, etc.), flattener would have added another $30.

You could probably do all the above prep and get it done for a bit less than $500. No sealer is needed, which would add another $70 to the cost of materials. I can send you a picture if I can find it!

Bob Berkemer wrote: > > Well, got my new (nice used) pop top and I'm getting ready to have it > and the luggage carrier painted to match the body, (as was from the > factory). Went to one of the "big" auto body places yesterday and they > quote me a price of $1,000. This seems a bit high to me. Went to another > shop that was recommended by my VW mechanic and they quoted $500. > Hummmmmm..... > > Anybody out there had their top painted and do you have any > recommendations? I want it to look as close to factory as possible and I > get nervous when they start talking about all the prep sanding. A smooth > shiny top isn't what I want. > > TIA > Bob, 84 westy > Menomonie WI > > P.S. Looked at a shinny new green diesel beetle today..... I want it!!!

-- Stuart MacMillan Manager, Case Program 800-909-8244 ext 208

Getting your share of the Net yet? http://www.cobaltgroup.com http://www.casedealer.com/demo http://www.caseihdealer.com/demo


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.