Date:         Wed, 1 Dec 1999 08:04:42 -0500
Reply-To:     Woody Halsey <WoodyHalsey@COMPUSERVE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Woody Halsey <WoodyHalsey@COMPUSERVE.COM>
Subject:      Copy of: Re: [bleeder valve]
Content-Type: text/plain; charset=ISO-8859-1

---------- Forwarded Message ----------

From:   Woody Halsey, 103666,2543
TO:     CARY CHIANG, INTERNET:chiang1@usa.net
DATE:   12/01/1999 8:06 AM
Re: [bleeder valve]

Dear List,

Cary points out that I did not describe the bleeder I am looking for.

I just always assume that everyone knows much more than I do about these
things, not that they can read my feeble and ill-stocked mind. Sorry! The

valve in question is a black plastic upside down "T" with an extra leg.
That is, there are two ports on one side, one on the other, and the bleeder
valve at the top. It goes between the two coolant hoses at the front of the
engine compartment and the coolant pipe on top of the block. I'm leaving
for  Europe on Friday. Maybe I can find one there, if none of you has one.

Woody