Alfred, Look to site, http://www.drill-out.com/drillout Usual disclaimer, etc.......... Tom Hanlon Palm Springs, CA 84 Westfalia Alfred Bagdan wrote: > Hi all > > Can anyone help me on this? After replacing leaky pushrod > tubes on my 85 Vanagon, I stripped the threads on one of the > studs that holds the rocker-arm assembly in place (Don't > ask how, lets just say I had a brain f*rt and used too much > torque). The nut does not come off either now. Since I > needed the van next day, I peened the end of the stud a > little bit, put the cover back on, topped off the oil and > have been driving with this for a few days now. Fixed the > oil leak but have this nagging problem of the stripped stud. > I ordered a new stud from VW, and it will be here tomorrow. > Question: How difficult is it to take out the stripped > stud? In case it doesn't want to come, do I heat it? Any > suggestions are greatly appreciated. > > Alfred > 85 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.