It occurred to me that the nut might just spin if it is completely stripped, in which case you will have to weld it to the stud or cut it off carefully with a hacksaw, grinder or chisel. Alfred Bagdan wrote: > > Hi all > > Can anyone help me on this? After replacing leaky pushrod > tubes on my 85 Vanagon, I stripped the threads on one of the > studs that holds the rocker-arm assembly in place -- Stuart MacMillan Manager, Case Program 800-909-8244 ext 208 Getting your share of the Net yet? http://www.cobaltgroup.com http://www.casedealer.com/demo http://www.caseihdealer.com/demo |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.