Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 1999, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 10 Dec 1999 13:10:38 -0000
Reply-To:     Phil Marston <pmarston@INSTECH.CO.UK>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Phil Marston <pmarston@INSTECH.CO.UK>
Subject:      Re: Front Ball Joints
In-Reply-To:  <000701bf430f$9ea8db60$1202ebd0@p166>
Content-type: text/plain; charset=US-ASCII

> Hi Phil, > The lower joints are difficult to replace without a shop press. > Sometimes with a press they still need to be heated a bit before they pop > loose. I have replaced them without a press but it is difficult and requires > a lot of pounding and felt maybe it was not good for the new joints to take > all the required pounding using the hammer method so bought a press several > years ago after struggling with joints on a 78 bus for a couple of days. Be > sure you have them properly oriented before you press the new ones back in. > (^_^) Smile.... > If you are in the Southern Illinois area drop by with new joints and the > knuckles in hand and watch a 30 ton press do its thing. > > Darrell Boehler > Makanda Illinois >

Thanks for the offer, but as I live in England I guess its a long way to go. I'll try to find someone more local.

Phil


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.