Date:         Tue, 14 Dec 1999 16:24:02 -0500
Reply-To:     "Fitz-Randolph, Douglas" <dfrandolph@TALKAM.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Fitz-Randolph, Douglas" <dfrandolph@TALKAM.NET>
Subject:      Re: Block heater question
Comments: cc: "Alan J. Flint" <ajflint@ITSA.UCSF.EDU>
Content-Type: text/plain

<< I want to install the Autobahn block heater ZVP 289
104, but I need to be sure it will fit under the skid plate
on my Syncro.  >>

Alan - It'll fit - and no need to drop the skid plate at all.
At least that was the situation on my '90 Syncro. The catch
is that you will need to bend one of the heater's two tabs
slightly to fit over one of the studs on the block - when you
are under the vehicle it will be obvious what I'm talking
about. The tab gets bent back to it's original position when
you tighten the nut. The cord is just long enough to route
out by the license plate door. Be sure and route it carefully
 - away from hot things and moving parts - using plenty of
zip ties!

Doug Fitz-Randolph
Yarmouth, ME
'90 Syncro