As far as the fuel pressure tester, the hose does not thread into the test "T", it fits over it. For short tests, a piece of 1/4 inch high pressure fuel hose can simply friction fit over the "T". Most of the inexpensive gauges (I used an oil pressure gauge) use 1/8 inch NPT fittings. Hose barbs are available in this thread also. Most any good hardware store or auto parts store should carry these items. Good luck. Steve Sandlin 84 Wolfsburg Westy 79 transporter 00 New Beetle |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.