I made a fairly inexpensive fuel pressure tester that works great. How? I bought the least expensive oil pressure gauge I could find (about 8 bucks) and used a couple of brass fittings to get to 1/4 inch hose barb. I then just used a piece of 1/4 inch fuel line to connect to the test T at the engine. I've used this setup for over 10 years on several injected busses and it works great. Good Luck. Steve Sandlin 84 Wolfsburg Westy 79 Transporter 00 New Beetle |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.