Date:         Mon, 20 Dec 1999 20:43:19 -0600
Reply-To:     Steve Sandlin <ssandlin@LCC.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steve Sandlin <ssandlin@LCC.NET>
Subject:      fuel pressure tester
Content-Type: text/plain; charset=ISO-8859-1

As far as the fuel pressure tester, the hose does not thread into the test
"T", it fits over it.  For short tests, a piece of 1/4 inch high pressure
fuel hose can simply friction fit over the "T".  Most of the inexpensive
gauges (I used an oil pressure gauge) use 1/8 inch NPT fittings.  Hose
barbs are available in this thread also.  Most any good hardware store or
auto parts store should carry these items.  Good luck.
Steve Sandlin
84 Wolfsburg Westy
79 transporter
00 New Beetle

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.