Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 1999, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 21 Dec 1999 07:07:59 -0500
Reply-To:     EMZ <vw4x4@FYI.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         EMZ <vw4x4@FYI.NET>
Subject:      Re: Lowering a Syncro
Comments: To: Carl Hansen <carl_hansen@IEEE.ORG>
In-Reply-To:  <v04011702b484b6a096fa@[206.11.2.205]>
Content-Type: TEXT/PLAIN; charset=US-ASCII

What you point out here is a BIg difference. Keep in mind that the layout of the front suspention is not the same. The angle and location to the wheel to the spring is not the same in the 2 wheel drive. Completely different animal.

Eric 86-VW4x4 vw4x4@fyi.net 72-240z Pittsburgh, PA USA 1936-Chrysler

On Mon, 20 Dec 1999, Carl Hansen wrote:

> I'm sitting here staring at a 2wd CARAT front spring, and a standard spring > from my '89 SyncroBeast. The ONLY difference, an I do mean the only > difference, is that the CARAT spring is about 1 inch shorter, and the > diameter of the wire is just ever so much thicker. > > I've posted the dimensions of the CARAT springs and Syncro springs to the > list before, I recall that the CARAT is about 1" shorter, but since it's > also a bit stiffer (I think), I expect that the stiffness will offset the > 1" shorter by a bit. > > > I don't see ANY reason for the front to raise 3 to 4 inches when I install > the CARAT spring in the Syncro. The CARAT spring is shorter, not longer, > than the Syncro spring. > > Ch > > '89 SyncroBeast Vanagon - Soon to come - New Shocks for the Syncro! > Soon as I get rid of the rust. ugh > '87 16V GTI > '80 850 Yamaha Special > '87 16V GTI w/ hale damage - parting out - body gone, parts remain > '89 16V GTI w/ toasted motor > '86 Scirocco (8 valve w/ auto) - SO's - now w/ it's own hale damage > > Prior Lake, MinneSnowta - Brrrrrrr! Winter's here. > > > > **** SNIP ORIGINAL **** > Date: Tue, 21 Dec 1999 00:33:00 +0100 > From: Per Lindgren <lindgre@ONLINE.NO> > Subject: Re: Lowering a Syncro > > Carl Hansen wrote: > > > Git springs from a CARAT version Vanagon. They is shorter. > > And they wont fit up front, actually if you get them to fit in the front, I > guess > you would raise the front end 3-4". You see, the Syncro has spring perches up > front, while the 2wd rests its springs on the suspension arm. > > PerL > 87 Syncro 112i >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.