All, OK, I did it... Finally. Last night (I did my heads a couple of weeks ago) I adjusted my valves to 6 mils of lash. My poor wasserboxxer sounds like a coffee can, full of ball-bearings, rolling down a hill. There was one adjuster turned all the way in! I wish I saw that when I put the rocker assembly back on. My idle is a little screwy now. It is up at about 1600 RPM. I am going to adjust the valves today (now that my lifters are "all pumped up"!)when I get home. Will my idle be OK after that, (I hope)? It was fine before I did the adjustment last night. It doesn't make much sense to me. Thanks for your reply. Rich and Annemarie 85 GL "Buba" 98 Bug ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.