Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 1999, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 23 Dec 1999 09:57:03 -0800
Reply-To:     Doran Nugent <doranosaurus@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Doran Nugent <doranosaurus@YAHOO.COM>
Subject:      Re: Need help w/armrest adjusters
Comments: To: BenTbtstr8@AOL.COM
Content-Type: text/plain; charset=us-ascii

Benjamin, I did the same thing and after hours of prodding and head scratching, I resigned myself to de-upolsterizing the arm rest to get at the innards. I found there is a nut into which the long spindle of the adjuster knob fits. The nut sits in a little cradle held in by gravity. when I removed the spindle the nut rolled out of place. I realized there would have been no way to get it back in place without accessing the insides of the arm rest.

One thing I learned by mistake was that, after removing the fabric, I didn't have to remove the foam that was glued to the wooden top piece of the arm rest. The top piece is a strip of wood screwed into the plastic arm rest body with phillips head screws. You can poke around with a finger and screwdriver through the foam to access the screws. Then you don't have to rip the foam off and reglue it, as did the author.

After I chalked up the ten hours I spent on the stupid arm rest, as a "learning experience," I found the Bentley manual did show the easy way to remove the arm rest from the seat proper.

If requested, I'll explain any part of the process in more detail.

Happy Christquanzanucha! Doran.

--- Benjamin Tan <BenTbtstr8@AOL.COM> wrote: > Hello Listees, > > I repaired the sagging front seat armrest of my '87 > GL w/ the help of the > archives. The "idiot" method worked best for me. > > Unfortunately, I made the attempt before consulting > the archives. I unscrewed > the adjusters in the process and now cannot seem to > thread them back on. Any > hints? I'd hate to have to strip the upholstery off > the armrest. It would > negate the elegance of the "idiot" solution. > > BenT > Citadel Properties. > San Francisco > (650) 994-7253 > > '87 GL Vanagon > '88 Fox Wagon > '89 Jetta GL > '80 Rabbit pick-up > '83 323i BMW (gray market) > '72 911 Targa (soon to be parted out) > '76 914 converted to 914-6 configuration > '79 Mercedes 280TE (gray market) > 80 Mercedes 300D >

_________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.