At 09:21 AM 12/31/1999 EST, you wrote: >Hello All: When I start the van, there is a >hesitation after I turn the key and the starter cranks. Many times the >starter will spin, then stop (without the key being released) and then spins >again. Usually on the third crank she will start. It seems to be taking >longer and longer before the engine starts.
Do check voltage from the switch at the starter solinoid. If feed to the solinoid is good during the event, the solinoid ist caput. Otherwise, you have a switch problem (VERY likely). It could be either and this one test will point out the offender, but requires a multimeter, and not a $19.95 drug store model, but a $200 model that can be obtained for $50 to $75 dollars on the better internet buy/sell/auction sites. Lifetime value of accurate measures will ensue therefrom.
T.P. Stephens aka Doktor Tim Surveyor, Mechanic, Poet, Philosopher San Juan Island, WA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.