I don't have experience with theses springs = personally. Steve Schwenk from the Syncro list had them on his = van for a while. Maybe he con comment some more.
Peter
-----Original Message-----
From: MAINTTEC DUNBAR [mailto:MAINTTEC.D=
UNBAR@TOTAL-OIL-MARINE.CO.UK]
Sent: Thursday, January 20, 2000 8:29 AM
To: vanagon@GERRY.VANAGON.COM
Subject: SYNCRO SPRINGS !!!
Hi Folks
Im looking at some heavy duty springs for westie =
16" syncro, I know there was a
list purchase of springs but Ive managed to source =
some from germany. the only
concerns I have are the spring rates quoted and I =
dont want to make my westie
too uncomfortable. The eibach/seikel springs have a =
140/120 kg/cm for front and
rear resp. The standard springs however are only =
75kg/cm so theres a bit of
difference there. Peter Seikel assures me that they =
are ok and he has fitted
even heavier ones to vehicles used in the Paris =
Dakar, but Im not wholly
convinced. Did they fit different shocks to the 16? =
because he mentioned that
the standard shocks would be ok if they had the =
prefix N in the part no. Also
has anybody any idea on the unloaded weights on the =
front and rear of a syncro
westie. This is all in preparation for my trip from =
the UK to Senegal this
autumn....... my alauminium sand track just fits =
perfectly across the front of
the roof!!!!
Stewart Signol