The shift pattern is different on a Syncro, isn't = it?  (because of the 5th "G-gear")

Brent

> -----Original Message-----
> From: Peter Cassidy [mailto:pcassidy@apple.com]=
> Sent: Tuesday, April 25, 2000 9:11 AM
> To: BRENT CHRISTENSEN; Vanagon Mailing = List
> Subject: Re: Gene Berg Short shift/extension = kit
>
>
> >I'm assuming that these Gene Berg kits = don't work for Syncros...  ?
> >
> >Brent Christensen
>
> Can't say for sure, but I don't see why not. = All they are is
> a 1" plate
> which is bolted to the floor. A collar is then = fitted to the gearshift
> stick and the stick is re-bolted to the floor = on top of the 1" plate.
> If the shifter is the same in a syncro as a 2WD = it should be OK.
>
> Pete C
>
> --
> Peter = Cassidy,          &nbs= p;        pcassidy@apple.com
> Sr. Test Dev. = Engineer          &nbs= p;  +353-21-284316
> WW Operations
> Apple, Cork, Ireland.
>