----- Original Message -----From: BRENT CHRISTENSENSent: Tuesday, May 23, 2000 = 8:56 PMSubject: Re: RadiatorJohn:
The likely reason you aren't getting a response is = that it would require disassembly and removal of the radiator in order to get = an accurate measurement!
While I believe in going out of my way from time to = time for the benefit of the List, I think that most people would agree that = pulling the radiator in order to measure it would be going way beyond the call of duty. :-)
Maybe a list vendor or someone that has one already = out can measure for you...
Brent Christensen
'89 GL = Syncro Westy
Santa Barbara, CA-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.CO= M]On Behalf Of John P
Sent: Tuesday, May 23, 2000 = 1:44 PM
To: vanagon@GERRY.VANAGON.COM =
Subject: Re: Radiator
I am asking this question for the third time, can = someone please give me the dimensions of the Vanagon radiator core? =
Its width, lenght and depth as well as how many rows (depth) = of cooling tubes there are. ie is it a 2 core, or 3 core radiator etc.I obviously do not have one, they are almost = impossible to get here in New Zealand, so I want to use a radiator from another vehicle, = making sure the donor radiator is as close as possible to the original = VW.
Regards,
John =
1982 air cooled. (soon to be water cooled.) =
----- Original Message -----
From: = John P
To: vanagon@GERRY.VANAGON.COM =
Sent: Sunday, May 21, 2000 9:32 PM
Subject: Fw: Radiator
----- Original Message -----
From: John P
To: vanagon@GERRY.VANAGON.COM =
Sent: Thursday, May 18, 2000 8:10 AM
Subject: Radiator
Can anyone give me the physical dimensions of the = Vanagon radiator, inches or cm, don't mind.
Also the = thickness of the Rad and how many rows (depth) of "cooling tubes" there are.
Thanks
John.