Whoa - easy there pardner! I apologize if that = seemed sarcastic (it was not meant to be). It was a light-hearted = way of explaining a possible reason you have not gotten a = response. I could have simply ignored it (and your need). = Instead, I had hoped to bring more attention to your plight, and = generate a useful response.
I guess next time I should just ignore it... = Good luck on your project.
Brent Christensen
'89 GL Syncro Westy
Santa Barbara, CA
-----Original Message-----
From: John P [mailto:jmp@bt-pacific.co.nz]
Sent: Tuesday, May 23, 2000 3:49 PM
To: BRENT CHRISTENSEN; =
vanagon@GERRY.VANAGON.COM
Subject: Re: Re: Radiator
Brent, appreciate the sarcasm.
But don't treat me like a moron.
Of course I do not expect anyone to dismantle their =
vehicle to do this!!
There must be someone on the list that has/had or is =
about to remove a radiator that could easily do this.
Regards.
John.
----- Original Message -----
From: BRENT CHRISTENSEN
To: vanagon@GERRY.VANAGON.COM
Sent: Tuesday, May 23, 2000 8:56 PM
Subject: Re: Radiator
John:
The likely reason you aren't getting a response is =
that it would require disassembly and removal of the radiator in order =
to get an accurate measurement!
While I believe in going out of my way from time to = time for the benefit of the List, I think that most people would agree = that pulling the radiator in order to measure it would be going way = beyond the call of duty. :-)
Maybe a list vendor or someone that has one already =
out can measure for you...
Brent Christensen
'89 GL Syncro Westy
Santa Barbara, CA
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.C=
OM]On Behalf Of John P
Sent: Tuesday, May 23, 2000 1:44 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Radiator
I am asking this question for the third time, can =
someone please give me the dimensions of the Vanagon radiator core? =
Its width, lenght and depth as well as how many rows =
(depth) of cooling tubes there are. ie is it a 2 core, or 3 core =
radiator etc.
I obviously do not have one, they are almost = impossible to get here in New Zealand, so I want to use a radiator from = another vehicle, making sure the donor radiator is as close as possible = to the original VW.
Regards,
John
1982 air cooled. (soon to be water cooled.) =
----- Original Message -----
From: John P
To: vanagon@GERRY.VANAGON.COM
Sent: Sunday, May 21, 2000 9:32 PM
Subject: Fw: Radiator
----- Original Message -----
From: John P
To: vanagon@GERRY.VANAGON.COM
Sent: Thursday, May 18, 2000 8:10 AM
Subject: Radiator
Can anyone give me the physical dimensions of the =
Vanagon radiator, inches or cm, don't mind.
Also the thickness of the Rad and how many rows =
(depth) of "cooling tubes" there are.
Thanks
John.