My door, bent in a front-end collision by PO has = been straightened so all works, except for the window glass rubbing on the = white plastic end / guide for the window cable. That guide attaches at = the top of the window opening, and should of course be out of the way of the glass. But I don't know what it's position should be to clear and = also operate properly -- can't tell even with the door panel = off. Before I remove the other door panel to compare, could anyone who = knows describe the proper placement? The glass itself seems to be = in the proper placement, because it tracks very well all the way up and = down. The only problem appears to be the cable guide at the top. Has = anyone dealt with this or a similar cable guide problem without removing the = motor / cable assembly?