Just installed 050 dizzy from bus =
depot.
Switched out the points to a used set of pertronix that I had in an =
009.
(this was the dizzy that came with my 2 liter).
The little ring and magnets came =
apart. I
put it back together carefully, but get no fire on the #1 wire. ( =
kinda
hard to use a timing light without it) .
What could be wrong? It was running on 3 cylinders.
I put the points and condenser back, =
and no fire
at all (used the grounded plug method to check. What is
up?????
TIA
Adam Puzerewski
81 westy
74 =
beetle
86
cabrio
Vanagon Partsmobiles