In a message dated 1/8/2001 11:53:26 PM Eastern Standard Time,
LISTSERV=
@GERRY.VANAGON.COM writes:
tools for cutting off fused=
rusted exhaust bolts????
Ed, a Dremel or Dremel replica with=
fibre reinforced cut off wheel
tool works just great for the tight spot=
s. Get a few of the cut off wheels
as you will use them up quickly=
. An ordinary hand held grinder with a cut
off wheel works for tho=
se bolts more accessible. You may find that the part
of the bolt s=
till remaining in the flange hole you need to use again may be
hardened =
and difficult to drill out. Use hardened drill bits for drilling
s=
tainless steel to get these holes back in use.
Happy New Year
Frank Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains
Member: Vanagon List, LiMBO, IWCCC & Capital City VW Club
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
STEBRO/Vanagon Stain=
less Steel Mufflers
Frank Condelli &a=
mp; Associates or http://frankcondelli.com