hi all, the auto =
transmission in my 85
westy has been leaking for the last few weeks, so today I crawed under =
her to
take a look, and found that the leak was coming from the 2nd gear brake =
band
piston. So I popped off the cover like the manual said and pulled out =
the
piston. One of the rubber seals were broken and the little metal clip =
was broken
as well. so I ordered a new seal from VW dealer, put it on the piston =
and went
to reassemble the whole thing it would not go back in. It seems that the =
rod in
the center { that pushes the piston} was out too far to replace the =
cover. is
there some trick to this? please any one who has any ideas let me know . =
thanks Alan