The other day after I fixed my tail = lights, I ripped out the heat system from underneath the van. All the hoses, = flap boxes, and cables were all junk. The heat booster looks like it is = alright, but I never had it running so I don't know if it is working and = the heat boxes are in good shape too. I took it out so it doesn't get = ruined while I drive around until I can afford to put the system back in. = Back to the problem, it now hesitates to start. I usually have to = tap the gas pedal quickly and then it will start. To me it sounds like a = cold start valve problem, but I just recently changed it and the problem = started immediately after I took out everything. The wiring for the heat = system is still in, I just taped up all the ends and stuffed it into the heater = hose that runs over the gas tank and into the dash until I can get it out without = ruining it.. Could it be because I disconnected everything? I also = put in a new section of fuel line right before the fuel pump where the T to the = heat booster was connected. Also, does anyone know where I can get a = set of straight pipes to put in place of the heat boxes? I want to get = them off the van too before they get ruined.