----- Original Message -----

From: Jack Lockamy

To: vanagon@GERRY.VANAGON.COM =

Sent: Sunday, June 24, 2001 = 6:46 PM

Subject: WANTED: Exhaust = Manifold

I'm looking for an exhaust = manifold for an 80-83 Vanagon (aircooled) 2.0L.

 

I am making a custom exhaust = system and only need the portion of the exhaust that bolts directly to the "square" = exhaust ports on the heads and extends down past the pushrods tubes.  No = heat exchanger, mufflers, etc. required.  Just the exhaust flanges and = about 6 inches of down pipe to where it goes into the collector.

 

If anyone has a used exhaust = system that may have been replaced with new equipment....I would be interested in the = flanges and downpipe I could use to weld a custom straight pipe system to.

 

Contact me offlist = please.

 

Jack Lockamy

Camarillo, CA.

jacklockamy@att.net

<= /BLOCKQUOTE>