----- Original Message -----
Sent: Sunday, July 08, 2001 =
8:03 AM
Subject: Door Lock =
Problem
Well, I really went and done it this =
time!
When I bought my 85 Westy, the door key only =
worked on the
driver's side and the rear hatch. Today, I thought I'd have a go =
at
fixing the problem with the passenger door. I could only insert =
the key
about 3/4 of the way in so I took off the handle and noted that the =
"U"
fitting attached to the cylinder would not rotate and seemed to be
corroded. I sprayed some liquid wrench on everything then =
proceeded to
put the handle in my vise and attempted to rotate the locking =
mechanism with a
big screw driver. Well, you know the rest of the =
story...
The "U" piece that moves the door lock mechanism up or down broke off =
the
cylinder.
So, my questions are:
1) Lord Almighty, What am I gonna do?
2) If I find a replacement handle and lock =
assembly, can the
tumblers be set to fit my current key?
3) Any other suggestions at this =
point?
-- Steve -- You out there???
Dave (embarrassed in KC)
85 Westy